Design requirements for corrugated washers

location:Home / NEWS / Design requirements for corrugated washers

Design requirements for corrugated washers

date:[2015-03-26]     pk_hits:
波形墊圈是由多個波峰和波谷構成的薄片環狀金屬元件,并擁有良好的彈性。
在設計波形墊圈時,先根據波形墊圈的形狀來設計模具。波形墊圈用環形圈通過沖壓的方式形成三個等高的波峰和波谷,并且要分步均勻。制造加工出波形墊圈的模具,并能夠令波形墊圈在上料裝置中波峰和波谷處在同一條直線上。
波形墊圈
一般波形墊圈的厚度保持在05-2mm之間,用不銹鋼等具有彈性性能的材料制作。在上料機構中,為了使波形墊圈在一定的時間間隔內,每次提供相同數量的波形墊圈到拾取位置,在上料過程中,使用步進電機的傳動方式來完成。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts